192.168.0.100 is a private IP address that some routers, access points, and other network devices use on a home or office network. It is not a public website address, so it only works when your computer or phone is connected to the same network as the device that uses it. Knowing what it is — and what it is not — saves a lot of guessing when a login page does not appear.
How to log in to 192.168.0.100
First, connect to the network by Wi-Fi or an Ethernet cable. Then open a browser and type http://192.168.0.100 into the address bar, not a search box. Press Enter and wait for the login page. Enter the admin username and password for your device, then click Log In or Sign In. Once you are in, you can change the Wi-Fi name and password, check connected devices, update firmware, and restart the router.
For the full step-by-step walkthrough, see https://wifirouterzone.com/ip/192-168-0-100/.
Default username and password
Many devices ship with simple defaults such as admin/admin, admin/password, or a blank username with admin as the password. The exact combination is usually printed on a sticker on the bottom or back of the device, or in its quick-start guide. If a previous owner changed the password and you do not know it, you will need to reset the device with its reset button and set it up again.
If the page will not load
Check that you typed the address correctly: the dots matter, and 192.168.0.100 is not the same as 192.168.1.100. Try another browser, clear the browser cache, and turn off any VPN, which can route you away from your local network. If the page still does not load, the address may belong to a different device on your network, or your router may use a different gateway, such as 192.168.1.1 or 192.168.0.1. You can find your gateway in your device's network settings.
If you have ever typed a similar address and landed on a modem page instead of a router page, this explanation of why 192.168.100.1 opens a modem page, not a router page, will help you tell the difference: https://dev.to/khalid_balouch_81ac0f7fab/why-1921681001-opens-a-modem-page-not-a-router-page-2hip
A quick safety note
Change the default admin password the first time you log in, and keep your firmware up to date. A strong admin password and a separate, strong Wi-Fi password are the simplest ways to keep your home network secure.



