Frontend
Gait Generation Balancing Joint Load and Mobility for Legged Modular Robots with Easily Detachable Joints
arXiv cs.RO0 views
arXiv:2603.04757v2 Announce Type: replace Abstract: Modular robots can adapt their morphology to diverse tasks, but locomotion can impose large loads on detachable joints. This paper presents an NSGA-III-based multi-objective gait optimization framework with three objectives: a locomotion speed, a static stability, and a normalized joint-load metric based on joint reaction forces. The framework yields nondominated gait candidates that reveal the trade-offs among these objectives. In a flat-terrain comparison using the 6-legged tetrapod gait, adding the joint-load objective reduced the mean maximum joint reaction force by 11.5% and increased the mean minimum stability by 41.2%, while decreasing the mean forward speed by 10.5%. Simulations under flat, slope, and step conditions showed that locomotion feasibility depended on the combination of robot configuration, gait, and terrain. In physical experiments, the 4-legged trot completed locomotion on flat terrain and a 10 degrees slope, whereas the 6-legged tetrapod and tripod completed locomotion on flat terrain. These results demonstrate the feasibility of joint-load-aware gait generation based on explicit trade-offs among the three evaluated quantities
Source:https://arxiv.org/abs/2603.04757PreviousNestRL: A Nested Training Regime for Mutual Adaptation in Human-AI TeamingNextDesigning and Validating a Self-Aligning Tool Changer for Modular Reconfigurable Manipulation Robots
Related posts
Passing a Room Key with 4 Pictures: Implementing SPAKE2 (RFC 9382) in the Browser
0dev.to
How Glass reads a vararg method
0dev.to
Graceful license recovery in a desktop app
0dev.to

Keeping iOS, Android and web in sync with AI agents
0dev.to
Psychopath: An All-in-One Threat Emulation & Social Engineering Framework
0dev.to
How renaming breaks Blazor component parameters
0dev.to