Frontend
Designing and Validating a Self-Aligning Tool Changer for Modular Reconfigurable Manipulation Robots
arXiv cs.RO0 views
arXiv:2603.04760v2 Announce Type: replace Abstract: Modular reconfigurable robots require reliable mechanisms for automated tool exchange, but conventional rigid active couplings often fail due to inevitable positioning and orientational errors. To address this, we propose a misalignment-tolerant tool changer. The tool changer consists of an insert part on the robot side, which contains a servo-driven cam and lock-pin, and a receptacle part on the tool side, which has an isosceles triangular lead-in guide and chamfered walls. During insertion, these geometries generate angled contact forces that passively align the two parts, so the tool changer compensates for angular and lateral misalignments without force sensors. A motor-driven rotating tool exchange station stores the tools and rotates to bring the selected tool to the exchange position. Experiments confirmed that, with the current guide and chamfer geometry, the tool changer tolerates rotational offsets of $ \pm$ 20 degrees and lateral offsets of up to 7 mm.
Source:https://arxiv.org/abs/2603.04760PreviousGait Generation Balancing Joint Load and Mobility for Legged Modular Robots with Easily Detachable JointsNextAsymptotically Stable Gait Generation and Instantaneous Walkability Determination for Planar Almost Linear Biped with Knees
Related posts
50 Free Browser-Based Tools That Run 100% Locally (No Uploads, No Sign-Up)
0dev.to

Binary vs. jump search: why the target changes the probe count
0dev.to
How we are getting first users for a side project with no audience
0dev.to
llms.txt in 5 minutes: a copy-paste template
0dev.to

Your Coding Agent Still Writes 2019 JavaScript. The Receipts Are In.
0dev.to
Healthtech Shipment Webhook Deduplication: FIFO Queue Idempotency Key Beyond Five Minutes
0dev.to