This is a submission for the Presage SmartSpectra SDK Challenge.
Breathing exercises are simple to follow: inhale, exhale, repeat. But finishing an exercise doesn't tell you whether your breathing was actually measured, how reliable those measurements were, or whether there is enough evidence to compare before and after.
That's the problem I wanted to address with Reset Receipt.
Reset Receipt is a Windows desktop breathing-break application built with Electron and the Presage SmartSpectra SDK. It combines a guided breathing experience with a measurement receipt that explains what the application actually observed.
The central idea is simple: a completed exercise should not automatically become a claim of improvement.
If the evidence is sufficient, the application can report a comparison. If it isn't, the receipt should clearly say so.
What I Built
Reset Receipt brings together three parts of a breathing session:
- Natural baseline: The user breathes normally while the application collects available breathing measurements.
- Guided breathing: The application provides a breathing pace of four seconds in and six seconds out. This is guidance, not a measured breathing rate.
- Evidence receipt: The application evaluates the accepted measurements and reports what the available evidence supports.
The application includes an explicit camera-consent flow, a user-provided Presage API key for real measurement, and a simulation mode for exploring the interface without a camera or key.
The receipt is the important part
Rather than displaying an improvement score regardless of measurement quality, Reset Receipt distinguishes between:
- Full: Enough accepted evidence is available for the supported comparison.
- Partial: Some evidence exists, but it is insufficient for a complete comparison.
- Insufficient: The available evidence does not support the intended result.
- Interrupted: The session did not complete normally.
A before-and-after comparison requires at least two accepted readings in both the baseline and guided phases. If either phase falls short, Reset Receipt does not invent a change.
This approach makes measurement uncertainty visible instead of hiding it behind a polished interface.
Demo
Watch the Reset Receipt demonstration:
The video demonstrates the installed application, camera-consent flow, clearly labeled simulation, SmartSpectra integration, and an archival receipt from a real SmartSpectra session.
Important evidence distinction: Simulation uses synthetic data and is explicitly labeled SIMULATION, NOT REAL. Simulated values are not presented as real measurements.
The archival real-session receipt shown in the demo contains:
| Measurement | Recorded result |
|---|---|
| Session median | 9.9 breaths/min |
| Observed range | 8.1–11.7 breaths/min |
| Accepted stable readings | 2 |
| Receipt status | Partial |
| Before/after comparison | Not available |
These results demonstrate that the application can retain and present real SmartSpectra measurements while acknowledging insufficient evidence for a full comparison.
The archival receipt was captured for the demo on November 18, 2026. The underlying measurement date has not been independently verified.
This is not evidence that the breathing exercise caused a physiological improvement, and I do not present it as such.
Code
Public GitHub repository:
https://github.com/ScapeXYZ/reset-receipt
Windows pre-release and installer:
https://github.com/ScapeXYZ/reset-receipt/releases/tag/v0.1.0
The repository includes the source code, setup instructions, SDK integration, evidence documentation, and information about the application's limitations.
How to run Reset Receipt
For Windows users, the simplest route is to download the installer from the GitHub pre-release.
For developers, the repository provides the project setup and development instructions. The application is built using Electron and integrates the SmartSpectra SDK in its renderer-side signal-processing flow.
Real measurement requires a valid Presage API key supplied at runtime and explicit camera consent. The simulation experience does not require a Presage key or a live camera session.
The application does not bundle a personal API key with the installer.
Using Your Phone as a Camera with Camo
If your PC's built-in webcam is unavailable or doesn't provide suitable video quality, you can try using your smartphone as an alternative camera through Camo.
Install Camo on your smartphone and Camo Studio on your Windows PC, then connect the devices using a supported USB or wireless connection.
Once Camo is running and your phone's camera is available to Windows, open Reset Receipt, select Camo Camera from the camera dropdown (if it appears), provide your Presage API key, review the camera-consent information, and start a real session only when you're ready.
This can be useful for laptops with low-quality or malfunctioning webcams. However, Camo does not bypass Reset Receipt's processing requirements, and successful SmartSpectra measurements still depend on compatible hardware, suitable lighting, stable camera input, and reliable signal detection.
Note: Camo compatibility is an alternative camera setup, not a separately verified Reset Receipt feature. Availability and measurement performance may vary by device.
How It Responds to Human Signals
The most important technical component is the integration with the Presage SmartSpectra SDK.
The SDK provides breathing-related information from camera input. Reset Receipt uses this information to build an evidence-based receipt rather than treating every received value as reliable.
1. SmartSpectra integration
The application uses the official SmartSpectra Electron SDK integration to access breathing-rate information and related signal data, including confidence information and a chest-breathing trace.
The integration is documented in the repository, including the relevant Electron setup and renderer-side code.
2. Measurement reliability
A breathing-rate value is not automatically accepted simply because the SDK returns it.
Reset Receipt applies checks involving:
- SDK confidence and stability information.
- A valid measurement timestamp.
- A breathing rate within the application's accepted range of 4–45 breaths per minute.
Readings that do not satisfy the required checks are excluded from the accepted evidence used for the receipt.
3. Guided pacing is separate from measurement
The breathing guide uses a four-second inhale and six-second exhale rhythm.
That rhythm is an instruction presented by the application. It is not a claim that the user's actual breathing rate matches the guide.
This separation matters because a guided animation can look successful even when the camera has not produced enough reliable measurements.
4. Evidence-based results
The application evaluates the accepted readings from the relevant session phases.
A complete comparison requires at least two accepted readings in both baseline and guided phases. Without sufficient evidence, the result remains partial or insufficient.
This is also why the real-session example in the demo reports only a session median, observed range, and two accepted readings. It does not manufacture a before-and-after improvement.
5. Simulation and testing
Reset Receipt includes a clearly identified simulation mode that allows the interface and receipt behavior to be demonstrated without consuming a live SmartSpectra session.
Synthetic values remain explicitly labeled and are not mixed with the archival real-session evidence.
This also makes it easier for reviewers to explore the application without needing to supply their own API key.
Camera Consent, Privacy, and Data Handling
Camera-based applications need to be clear about what users are agreeing to.
Reset Receipt includes an explicit consent step before a real measurement session begins.
Camera access and consent
The user selects a camera, supplies their own Presage API key, and reviews the consent flow.
The application does not begin a real measurement session merely because the consent dialog is opened. The user must explicitly proceed.
A Cancel option is available before starting.
API-key handling
The Presage API key is supplied at runtime rather than bundled into the distributed application.
Users should keep their API keys private and avoid sharing them in screenshots, recordings, or public issue reports.
Video storage and retention
Reset Receipt is designed not to save raw camera video as a local recording.
The application's receipt contains derived measurement information rather than a saved video of the user.
The application's handling of camera input should not be confused with the independent telemetry, processing, or retention policies of the Presage SDK and its services. Those service-level details must be reviewed separately under Presage's applicable documentation and policies.
Sharing and external services
The application uses the Presage SDK for real measurement. The demo's simulation mode does not require a live Presage session.
Reset Receipt does not use an optional LLM insights service in the demonstrated workflow.
The application is a breathing-break and evidence-reporting prototype, not a medical device. It does not diagnose health conditions or establish clinical breathing accuracy.
Technical Challenges and Lessons Learned
One of the biggest challenges was separating a functioning application from a trustworthy measurement claim.
A camera-based SDK can return information under different conditions, but that does not mean every reading should be treated as equally reliable.
The real-session receipt illustrates the problem clearly: two stable readings were accepted, but that was not enough for a complete before-and-after comparison.
Instead of treating the missing comparison as a failure to hide, Reset Receipt exposes the limitation directly.
Another challenge was demonstrating the application without confusing synthetic and real evidence. The final demo distinguishes simulation footage from the archival real receipt and explains what each one proves.
I also wanted the application to remain usable for reviewers who do not have a Presage API key. Simulation provides a way to understand the interaction and receipt design while keeping its synthetic status visible.
Prize Categories
I'm submitting Reset Receipt in both categories:
Creative
Reset Receipt explores a different way to present a breathing exercise: the outcome is not simply an animation or completion badge, but a receipt explaining the available measurement evidence.
The receipt makes uncertainty part of the user experience.
Real-World
The application addresses a practical problem in wellness software: people can complete guided activities without knowing what was actually observed.
By combining camera-based breathing measurements, explicit consent, reliability checks, and evidence-aware reporting, Reset Receipt demonstrates a more transparent approach to breathing-break applications.
What Comes Next
Future development could improve measurement reliability, strengthen the user experience around incomplete sessions, and expand testing across different cameras and environments.
Those are future possibilities, not features claimed to be completed in this submission.
For this release, the goal is narrower: demonstrate a functional SmartSpectra-integrated desktop application that treats real measurements, simulated data, and insufficient evidence honestly.
Community Feedback — Help Shape Reset Receipt
Reset Receipt is an early-stage project, and I'd love to hear what developers, wellness enthusiasts, and people experimenting with camera-based technology think about it.
I'm particularly interested in your thoughts on:
- User experience: Is the breathing guide easy to understand and follow?
- Measurement transparency: Does the evidence receipt make it easier to understand what was actually measured?
- Camera compatibility: Have you experimented with using a smartphone as a webcam through Camo or similar tools?
- Privacy: What additional camera-consent or data-handling controls would make you more comfortable?
- Future improvements: What would make Reset Receipt more useful in your daily routine?
You can explore the source code, watch the demo, or try the Windows pre-release.
I'd love to hear your feedback in the comments. Whether it's a bug report, feature suggestion, technical question, or constructive criticism, your input can help shape the next version.
If you try Reset Receipt, please share your experience, including what worked and what didn't. You don't need to share private camera footage, API keys, or personal health information.
I'm looking forward to learning from the community!
Final Thoughts
Reset Receipt started with a simple question:
What if a breathing app told you not just what to do, but what it actually measured?
Presage SmartSpectra made it possible to explore that question through camera-based breathing signals.
The result is a desktop application that guides a short breathing break and provides a receipt grounded in the evidence available.
Sometimes that receipt contains a comparison. Sometimes it says the evidence is incomplete.
Both are useful outcomes when the goal is to build software people can understand and trust.
Repository: https://github.com/ScapeXYZ/reset-receipt
Windows pre-release: https://github.com/ScapeXYZ/reset-receipt/releases/tag/v0.1.0
Demo: https://youtu.be/bab9zBAiFGQ
Built for the Presage SmartSpectra SDK Challenge.

