Frontend
Designing and Validating a Self-Aligning Tool Changer for Modular Reconfigurable Manipulation Robots
arXiv cs.RO0 views
arXiv:2603.04760v2 Announce Type: replace Abstract: Modular reconfigurable robots require reliable mechanisms for automated tool exchange, but conventional rigid active couplings often fail due to inevitable positioning and orientational errors. To address this, we propose a misalignment-tolerant tool changer. The tool changer consists of an insert part on the robot side, which contains a servo-driven cam and lock-pin, and a receptacle part on the tool side, which has an isosceles triangular lead-in guide and chamfered walls. During insertion, these geometries generate angled contact forces that passively align the two parts, so the tool changer compensates for angular and lateral misalignments without force sensors. A motor-driven rotating tool exchange station stores the tools and rotates to bring the selected tool to the exchange position. Experiments confirmed that, with the current guide and chamfer geometry, the tool changer tolerates rotational offsets of $ \pm$ 20 degrees and lateral offsets of up to 7 mm.
Source:https://arxiv.org/abs/2603.04760PreviousGait Generation Balancing Joint Load and Mobility for Legged Modular Robots with Easily Detachable JointsNextAsymptotically Stable Gait Generation and Instantaneous Walkability Determination for Planar Almost Linear Biped with Knees
Related posts
Passing a Room Key with 4 Pictures: Implementing SPAKE2 (RFC 9382) in the Browser
0dev.to
How Glass reads a vararg method
0dev.to
Graceful license recovery in a desktop app
0dev.to

Keeping iOS, Android and web in sync with AI agents
0dev.to
Psychopath: An All-in-One Threat Emulation & Social Engineering Framework
0dev.to
How renaming breaks Blazor component parameters
0dev.to